BRAND : FIAC
ITEM NO.: DRYER TDRY 12
ORIGIN : ITALY
MAX PRESSURE : 16 BAR
FLOW RATE : 1200 L/MIN
FLOW RATE : 72 M³/H
POWER SUPPLY : 230V 50HZ
PHASE : 60
Ø CONNECTIONS : 3/4''M
DIMENSIONS : 35 X 49 X 45 CM
WEIGHT : 25 KG

INTELLIGENT CAPACITIVE DISCHARGE :
THE FIAC REFRIGERATION DRYER IS EQUIPPED WITH A CAPACITIVE CONDENSATE DRAIN, WHICH USES ELECTRONIC SENSORS TO DRAIN THE CONDENSATE ONLY WITHOUT WASTING COMPRESSED AIR, GUARANTEEING ENERGY SAVINGS AND ABSENCE OF NOISE AND RESPECT FOR THE ENVIRONMENT.

. FOR QUALITY COMPRESSED AIR
. REDUCES HUMIDITY DOWN TO DEW POINT
. CONTROLLED BY AN ELECTRONIC CONTROL UNIT THAT PROVIDES ALL USEFUL INFORMATION
. STATE OF THE REFRIGERATION DRYER
. FAN STATUS
. DEW POINT INDICATION
. HIGH OR LOW DEW POINT ALARM
. MAINTENANCE WARNING

FIAC TDRY 12 IS A REFRIGERATION CYCLE DRYER BASICALLY EQUIPPED WITH AN INTERNAL CIRCUIT THROUGH WHICH A REFRIGERANT GAS FLOWS WHICH, THROUGH THE COOLING PHASES OF THE INCOMING COMPRESSED AIR, CONDENSATION OF HUMIDITY, SEPARATION AND TIMED DISCHARGE, REDUCES THE RELATIVE HUMIDITY OF THE AIR . COMPRESSED OUTPUT FROM THE DRYER UP TO A DEW POINT (2-3 ° C TEMPERATURE IN WHICH THE AIR BECOMES SATURATED WITH WATER VAPOR).

IN ADDITION TO SOLID RESIDUES AND OIL VAPORS, THE COMPRESSED AIR THAT IS EMITTED BY THE COMPRESSORS ALSO HAS A PERCENTAGE OF HUMIDITY COMING FROM THE EXTERNAL ENVIRONMENT WHICH CAN LEAD TO THE FORMATION OF CONDENSATION. TO AVOID THIS FORMATION OF CONDENSATION , THE FIAC TDRY REFRIGERATION CYCLE DRYER COMES INTO PLAY, WHICH REDUCES THE RELATIVE HUMIDITY OF THE COMPRESSED AIR FROM THE COMPRESSOR, THUS GUARANTEEING QUALITY COMPRESSED AIR.

IN THE COMPRESSED AIR, TOGETHER WITH DUST AND OIL VAPORS, THERE IS A QUANTITY OF HUMIDITY COMING FROM THE EXTERNAL ENVIRONMENT WHICH CAN LEAD TO THE FORMATION OF CONDENSATION. THEREFORE, FOR A CORRECT FUNCTIONING OF THE PNEUMATIC EQUIPMENT, IT IS NECESSARY TO DRASTICALLY REDUCE THE DEGREE OF RELATIVE HUMIDITY PRESENT IN THE COMPRESSED AIR. GENERALLY IN PNEUMATIC INSTALLATIONS, BETWEEN THE AIR COMPRESSOR AND THE EQUIPMENT USED IT IS RECOMMENDED TO IMPLEMENT COMPONENTS AND EQUIPMENT DEDICATED TO THE TREATMENT OF COMPRESSED AIR. THESE DEVICES FIND GREATER USE ESPECIALLY WHERE THE QUALITY AND PURITY OF THE COMPRESSED AIR IS FUNDAMENTAL, SUCH AS IN THE INSTALLATIONS OF MEDICAL COMPRESSORS.