NAMSON MINI WOOD LATHE BG-3309 | VARIABLE SPEED CONTROL COVERING BETWEEN 100 AND 5000 RPM

BRAND : NAMSON
ITEM NO.: BG-3309
ORIGIN : CHINA
NUTRITION : NET
VOLTAGE : 230 V
POWER : 480W
MACHINE TYPE : ON WOOD
NUMBER OF REVOLUTIONS : 100 - 5000 RPM
EQUIPMENT :
BEKING BG-3309 LATHE
COMPONENTS : KEYS X 8 PCS -SPARE BRUSHES X 1 PAIR - BELT
CHUCK CLAMPING : HEADSTOCK : 1-63 MM
MILLING ATTACHMENT : 1-13
TAILSTOCK : 1-10
DIMENSIONS : H 32 X W 43 X D 53 CM
WEIGHT : 16.8 KG

THIS MACHINE CAN HANDLE WOOD OR PLASTIC WORKPIECES, AS WELL AS AMBER AND SOFTER STONE. USING A SPECIAL CHISEL STOP THAT MOVES FORWARD AND BACKWARD ALONG THE ENTIRE LENGTH OF THE BED, YOU CAN USE HAND CHISELS WHEREVER YOU PREFER. MOREOVER, YOU CAN MAKE NOT ONLY TURNED OBJECTS USING HAND CUTTING TOOLS, BUT ALSO SPHERES (BEADS) USING SPECIAL CUTTERS. BY INSTALLING SMALL-DIAMETER FINGER CUTTERS IN THE ATTACHMENT, YOU CAN COMPLETELY ELIMINATE THE NEED FOR HAND CHISELS.

A DEFINITE ADVANTAGE OF THIS MACHINE IS ITS SMOOTH MOTOR SPEED CONTROL, WHICH RANGES FROM 100 TO 5000 RPM. ALTHOUGH THE MACHINE'S MOTOR BOASTS A RATHER IMPRESSIVE 480 WATTS OF POWER, ITS MAGNETIC STATOR IS JAM-RESISTANT, AND THE BELT DRIVE ENSURES QUIET OPERATION AND PROTECTS THE MOTOR FROM OVERLOAD.

THE MAIN DISTINGUISHING FEATURE OF THIS MACHINE IS ITS INSTALLATION ON A UNIQUE "COORDINATE TABLE," WHICH IN TURN IS SECURED TO THE MAIN FRAME. THIS DESIGN ALLOWS THE WORKPIECE, CLAMPED BETWEEN THE HEADSTOCK AND TAILSTOCK, TO BE MOVED USING COORDINATE GUIDES (RIGHT-LEFT-FORWARD-BACKWARD) AND USED AS A SUPPORT RELATIVE TO THE MILLING ATTACHMENT. IN OTHER WORDS, IT'S NOT THE ATTACHMENT THAT MOVES, BUT THE LATHE ITSELF. ALL GUIDES ARE ALSO EQUIPPED WITH CLAMPING SCREWS WITH THUMBSCREWS TO SECURELY FASTEN THE MACHINE AT ANY POINT IN ITS MOVEMENT, OR TO ELIMINATE ANY ALREADY MINIMAL PLAY.

THE MACHINE IS EQUIPPED WITH A FOUR-JAW CHUCK WITH A DIAMETER OF 80 MM, WHICH CAN CLAMP WORKPIECES UP TO 50 MM IN DIAMETER ON STRAIGHT JAWS. THE INCLUDED DRILL CHUCK (WHICH CAN ALSO BE INSTALLED IN THE TAILSTOCK) SIGNIFICANTLY EXPANDS THE MACHINE'S CAPABILITIES. A SIMPLE WEDGE-TYPE STOP HEAD IS ALSO INCLUDED, WHICH CAN BE INSTALLED IN PLACE OF THE CHUCK AND CLAMPS THE WORKPIECE BETWEEN IT AND A CONE MOUNTED IN THE TAILSTOCK.

FOR EXTRA PRECISION, A RULER IS ATTACHED TO THE COORDINATE TABLE; WHEN MOVED LEFT OR RIGHT, IT SHIFTS RELATIVE TO A RED “FLAG” ATTACHED TO THE FRAME ITSELF, ALLOWING THE PART TO BE POSITIONED WITH MILLIMETER ACCURACY.

THE MILLING ATTACHMENT CONSISTS OF A HORIZONTAL STAND ATTACHED TO THE MACHINE BED, WHICH HOUSES A COMPACT, FIXED SPINDLE WITH A CHUCK FOR HOLDING DRILLS, MILLING CUTTERS, OR HOLE SAWS WITH SHANKS FROM 1 MM TO 10 MM. THE ATTACHMENT ALSO FEATURES SMOOTH SPINDLE SPEED CONTROL AND A POWER OUTPUT OF 710 W, WITH A MOTOR SPEED FROM 0 TO 2800 RPM.

FOR SAFE OPERATION, A FOLDING PROTECTIVE COVER IS ATTACHED ABOVE THE HEADSTOCK. BUT MOST IMPORTANTLY, NEVER MACHINE A PART WITH CUTTERS CLAMPED IN THE ATTACHMENT WHEN IT'S TURNED OFF! THIS WILL 100% OF THE TIME RESULT IN EITHER INJURY OR DAMAGE TO THE MACHINE OR ATTACHMENT!