BRAND : STEPS

ITEM NO.: Z-10-S1P

ORIGIN : CHINA

COLOR : BLACK

PACKAGING DIMENSIONS : L 32.5 X W 18.5 X H 11.5

1. 100% NON-METALLIC SAFETY SHOE
2. OIL RESISTANT SOLE
3. NON-SLIP SOLE
4. COMPOSITE TOE CAP
5. HEAT RESISTANT SOLE
6. KEVLAR MIDPLATE
7. COMFORTABLE PADDING

THE STEPS SAFETY BOOTIS DESIGNED FOR PROFESIONAL USE AND COMPLIES WITH THE EUROPEAN UNI EN 20345 CE S1P STANDARDS THE BOOT IS MANUFACTURED USING THE BESTMATERIALS RECOGNIZED AS SUITABLE BY THE EN 20345 STANDARD BOTH AS REGARD QUALITY AND PEFORMANCE. THE BOOT IS PROVIDED WITH A ANTIPERTORATION PLATE THE SAFETY TOECAP GUARANTEES TOE PROTECTION AT AN IMPACT OF 150 JOULES AND COMPRESSION RESISTANCE UNDERA MAXIMUM LOAD OF 1500DAN. THE MIDSOLE ANTIPERFORATION PLATE GUARANTEES PERFORATION PROTECTION OF 100 N.THE BOOT SIZE, THE DATE OF MANUFACTURE THE STANDARDISITE COMPIES WITH,' THE PROTECTION

LEVEL ARE ALL MARKED THE MIDDLE OF THE SOLE.

THIS BOOT FEATURES THE SYM BOL S1P WHICH MEANS:-

1. PRESENCE OF THE ANTIPERFORATION PLATE
2. PRESENCE OF COMPOSITE TOECAP
3. ENERGY (SHOCK) ABSORPTION IN THE HEEL
4. ANTISTATIC SOLE
5. THICKNESSES IN COMPLIANCE WITH STANDARDS THE ANKLEE BONE AREA.
6. THICKNESSES IN COMPLIANCE WITH STANDARDS OVER THE WHOLE OF THE UPPER
7. THICKNESSES IN COMPLIANCE WITH STANDARDS OVER THE WHOLE OF THE SOLE
8. RESISTANCE ABRASION

THE BOOT SATISFY THE CONTACT HEAT RESISTANCE REQUIREMENTS OFTHE HARMONIZED STANDARD EN 20345.

TECHNICAL GUIDANCE: ANTISTATIC FOOTWEAR USAGE

ANTISTATIC FOOTWEAR SHOULD BE USED WHEN IT IS NECESSARY TO MINIMIZE ELECTROSTATIC BUILD-UP BY DISSIPATING ELECTROSTATIC

CHARGES, THEREBY AVOIDING THE RISK OF SPARK IGNITION (FOR EXAMPLE, OF FLAMMABLE SUBSTANCES AND VAPORS). IF THE RISK OF ELECTRIC SHOCK FROM ELECTRICAL APPARATUS OR LIVE PARTS HAS NOT BEEN COMPLETELY ELIMINATED, ADDITIONAL MEASURES TO AVOID THIS RISK ARE ESSENTIAL. SUCH MEASURES, ALONG WITH THE ADDITIONAL TESTS MENTIONED BELOW, SHOULD BE A ROUTINE PART OF THE WORKPLACE ACCIDENT PREVENTION PROGRAM.

ELECTRICAL RESISTANCE STANDARDS

EXPERIENCE HAS SHOWN THAT FOR ANTISTATIC PURPOSES, THE DISCHARGE PATH THROUGH A PRODUCT SHOULD NORMALLY HAVE AN ELECTRICAL RESISTANCE OF LESS THAN 1,000 MΩ THROUGHOUT ITS USEFUL LIFE.

NEW PRODUCTS: A VALUE OF 100 KΩ IS SPECIFIED AS THE LOWEST LIMIT OF RESISTANCE FOR A NEW PRODUCT.

PURPOSE: THIS LIMIT ENSURES LIMITED PROTECTION AGAINST DANGEROUS ELECTRIC SHOCK OR IGNITION IN THE EVENT OF ELECTRICAL APPARATUS BECOMING DEFECTIVE WHEN OPERATING AT VOLTAGES UP TO 250 V.

LIMITATIONS AND ENVIRONMENTAL FACTORS

USERS SHOULD BE AWARE THAT UNDER CERTAIN CONDITIONS, THE FOOTWEAR MIGHT PROVIDE INADEQUATE PROTECTION; ADDITIONAL PRECAUTIONS SHOULD BE TAKEN AT ALL TIMES. THE ELECTRICAL RESISTANCE OF THIS FOOTWEAR CAN BE CHANGED SIGNIFICANTLY BY: FLEXING - CONTAMINATION - MOISTURE

IMPORTANT: THIS FOOTWEAR WILL NOT PERFORM ITS INTENDED FUNCTION IF WORN IN WET CONDITIONS. IT IS NECESSARY TO ENSURE THE PRODUCT REMAINS CAPABLE OF DISSIPATING ELECTROSTATIC CHARGES AND PROVIDING PROTECTION THROUGHOUT ITS ENTIRE LIFESPAN.

MAINTENANCE AND BEST PRACTICES

FREQUENT TESTING: THE USER IS RECOMMENDED TO ESTABLISH AN IN-HOUSE TEST FOR ELECTRICAL RESISTANCE AND PERFORM IT AT REGULAR

INTERVALS.

HAZARD AREAS: IF WORN IN CONDITIONS WHERE THE SOLE BECOMES CONTAMINATED, WEARERS MUST ALWAYS CHECK THE ELECTRICAL PROPERTIES OF THE FOOTWEAR BEFORE ENTERING A HAZARDOUS AREA.

FLOOR RESISTANCE: WHERE ANTISTATIC FOOTWEAR IS IN USE, THE RESISTANCE OF THE FLOORING SHOULD BE SUCH THAT IT DOES NOT INVALIDATE THE PROTECTION PROVIDED BY THE FOOTWEAR.

INSERTS: NO INSULATING ELEMENTS SHOULD BE INTRODUCED BETWEEN THE INNER SOLE OF THE FOOTWEAR AND THE FOOT OF THE WEARER. IF ANY INSERT IS PLACED BETWEEN THE SOLE AND THE FOOT, THE COMBINED ELECTRICAL PROPERTIES OF THE FOOTWEAR AND INSERT MUST BE RE-CHECKED.