Hover to zoom
DECA WELDING MABRAND : DECA
ITEM NO.: D-MIG 530SD 259100
ORIGIN : ITALY
MIG/MAG WELDING SYSTEM : 1P-230V 50/60 HZ" SIMPLE WELD" SYNERGIC MIG CONTROL FACILITATES THE ADJUSTMENT OF THE WELDING MACHINE
WELDING CURRENT RANGE (AMP) : 25-240A
WELDING POSITIONS : (N°) : 6
DUTY CYCLE (AMP) (EN 60974-1 40°C) : 200A-15% _ 100A-60%
OPEN CIRCUIT VOLTAGE : 28-62V
INPUT VOLTAGE (50/60HZ) : 1PH - 230V
ABSORBED POWER 60% / MAX: 2.4/5.5 KW
FUSE (AMP) : 32A
STEEL WIRE ( Ø MM) : Ø 0.6 - 0.8 - 1.0 MM
STAINLESS STEEL WIRE ( Ø MM) : Ø 0.8 - 1.0 MM
AL.MG - AL.SI WIRE (Ø MM) : Ø 0.8 -1.0 MM (AL.MG 5 - AL.SI 5)
CU.SI 3 WIRE (Ø MM) : Ø 0.8-1.0 MM
WIRE SUITABLE SPOOL : Ø 200 - 300 MM
WIRE FEEDER : 2 ROOLER
OUTPUT CONNECTION : DX 25 MM2 / EURO
THERMOSTATIC PROTECTION : YES
. SYNERGIC OR MANUAL WELDING
. AMMETER AND DIGITAL VOLTMETER
. WELDING IN 2T/4T MODE
. CONTINUOUS WELDING, SPOT, STICH
. SUB-MENU FOR ADJUSTING THE SECOUNDARY PARAMETERS : BURN BACK, SOFT START RAMO, PAUSE TIME IN STICH MODE
. IT HOUSES WIRE SPOOLS WITH A DIAMETER OF 200 - 300 MM
. WIRE FEEDER WITH TWO ROLLERS DIAMETER 30 MM
. TORCH WITH EURO CONNECTION
. THERMOSTATIC PROTECTION
. FORCED VENTILATION
. TROLLEY WITH FRONT AND REAR WHEELS, REAR CYLINDER HOLDER FOR 4 M3 CYLINDERS
. TORCH HOLDER
. THE D-MIG 530 SD LAB DELIVERS 240 AMPS AND CAN RECEIVE WIRES WITH A DIAMETER FROM 0.6 TO 1.0 MM. THE POWER SUPPLY VOLTAGE IS SINGLE-PHASE AT 230 VOLTCHINE D-MIG 530SD 259100
| Item Code | DECAWMDMIG530SD |
|---|---|
| Barcode | 8011399023831 |
| Brand | DECA |
1. Connect the machine to a 230V single-phase power supply.
2. Install the wire spool (Ø 200–300 mm) and feed it through the 2-roller feeder.
3. Connect the MIG torch (Euro connection) and earth clamp.
4. Select synergic or manual welding mode.
5. Adjust welding current and parameters (wire speed, voltage, burn back, etc.).
6. Start welding using 2T/4T mode depending on application.
7. After use, switch off the machine and allow cooling.
The DECA D-MIG 530SD is a professional MIG/MAG welding machine designed for precise and efficient welding of steel, stainless steel, aluminum, and CuSi materials. It is ideal for fabrication, repair, and maintenance work.
The D-MIG 530SD offers a perfect balance of performance and ease of use. Its synergic control simplifies welding setup, while advanced features ensure precise results. The robust Italian design makes it reliable for professional applications.
• Professional welders
• Fabrication workshops
• Automotive repair centers
• Maintenance technicians
• Industrial users
Used in workshops, fabrication plants, automotive repair shops, and industrial environments for MIG/MAG welding applications.
The machine delivers up to 240A welding current.
It can weld steel, stainless steel, aluminum, and CuSi materials.
It operates on a 230V single-phase power supply.
Yes, it features synergic MIG control for easy parameter adjustment.
Yes, it is designed for professional and industrial welding applications.
No reviews yet. Be the first to review this product!
