Hover to zoom
Disclaimer: Images are for illustration purposes only. Actual product appearance, colour, packaging, or accessories may vary slightly from the images shown.
BRAND : SUNTECH
ITEM NO.: SG-2288
ORIGIN : TAIWAN
BLOWS PER MIN.: 4800 BPM
AIR INLET : 1/4" NPT
HOSE SIZE : 3/8 ID (10 MM)
AIR CONSUMPTION : 2 CFM ( 57 L/MIN)
OVERALL LENGTH : 8.5" (217 MM)
WEIGHT : 2.4 LBS (1.1 KG)
| Item Code | SUNSG-2288 |
|---|---|
| Barcode | 6291116934363 |
| Brand | SUNTECH |
The SUNTECH SG-2288 Air Flux Chipper is a pneumatic tool designed for removing welding slag, hardened deposits, rust and other unwanted surface materials from metal components. Powered by compressed air, this compact chipping tool delivers rapid impact action to help remove stubborn residues during metal fabrication, welding and industrial maintenance work. Its chisel attachment makes it suitable for controlled chipping and surface cleaning applications.
The SUNTECH SG-2288 is primarily used for chipping and removing unwanted materials from metal surfaces. It helps remove welding slag, rust deposits, hardened residues and surface buildup during fabrication, repair and maintenance operations. Its pneumatic impact mechanism delivers repeated striking action through the attached chisel, making it useful for jobs where manual chipping would require additional effort.
Follow the manufacturer's operating instructions and use the appropriate chisel attachment for the material and application.
Inspect the chipper, chisel, air hose and connections before operation.
Install the correct compatible chisel and ensure its retaining mechanism securely locks it in place.
Connect a suitable compressed-air hose and set the operating pressure according to the manufacturer's instructions.
Hold the tool firmly with both hands and position the chisel against the material to be removed.
Operate the trigger and allow the pneumatic impact action to remove unwanted material. Avoid excessive pressure.
Release the trigger, disconnect the air supply and clean and lubricate the tool as recommended.
Wear safety goggles, hearing protection, suitable gloves and protective footwear. Secure the workpiece before chipping. Keep hands away from the chisel and flying debris. Never change attachments or perform maintenance while the air supply is connected. Use the recommended air pressure and lubricate the pneumatic tool as instructed by the manufacturer.
Delivers repeated pneumatic striking action for effective removal of stubborn surface deposits.
Designed to work with a compatible chisel for targeted chipping and material removal.
Uses compressed air to power its impact mechanism without requiring an electric motor.
Its compact construction is convenient for workshop and industrial maintenance tasks.
Designed to operate with a compressed-air supply, making it suitable for compatible workshop air systems.
Suitable for metal fabrication, welding cleanup and general industrial maintenance work.
Removing hardened welding residues and unwanted deposits manually can take considerable time and effort. The SUNTECH pneumatic flux chipper provides powered impact action to support faster and more convenient chipping operations.
The SUNTECH SG-2288 is suitable for professionals and workshops that regularly perform metal surface cleaning, welding cleanup and maintenance operations.
It is used for removing welding slag, rust deposits, hardened residues and other unwanted materials from suitable metal surfaces using pneumatic impact action.
A pneumatic flux chipper uses compressed air to drive an internal impact mechanism that repeatedly strikes the attached chisel, helping break and remove unwanted material.
Yes. Removing welding slag and hardened welding residues is one of the main applications of a flux chipper. Use the appropriate chisel for the work.
Yes. It is suitable for metal fabrication and welding workshops where chipping and removal of unwanted metal surface deposits are required.
Yes. It is a pneumatic tool and requires a compatible compressed-air supply to operate.
Use the compatible chisel attachment specified for the SG-2288. Always verify the shank size and retaining mechanism before installation.
It can help remove heavy, loose or hardened rust deposits through chipping action. It is not a substitute for dedicated surface polishing or fine rust-removal equipment.
Inspect the tool regularly, keep the air supply clean and lubricate the pneumatic mechanism using suitable air-tool oil according to the manufacturer's maintenance instructions.
Choose the SUNTECH SG-2288 Air Flux Chipper for welding cleanup, metal fabrication and industrial maintenance applications. A practical pneumatic solution for professional workshop chipping tasks.
No reviews yet. Be the first to review this product!
